Changes in Health Literacy during the first year following a kidney transplantation: Using the Health Literacy Questionnaire

ObjectivesThe study aimed to identify changes in health literacy (HL) and associated variables during the first year following a kidney transplantation.MethodsA total of 196 transplant recipients were included in a prospective follow-up study. The patients answered the Health Literacy Questionnaire (HLQ) at 5 days, 8 weeks, 6 and 12 months following the kidney transplantation. Mixed linear models were used to analyze changes in HL and backward elimination was used to identify variables associated with HL.ResultsTwo main patterns of change were identified: a) HL increased during the first 8 weeks of close follow-up and b) in several domains, the positive increase from 5 days to 8 weeks flattened out from 5 days to 6 and 12 months. Self-efficacy, transplant-related knowledge, and general health were core variables associated with HL.ConclusionsOverall, HL increased during the 8 weeks of close follow-up following the kidney transplantation, while 6 months seem to be a more vulnerable phase. Furthermore, low self-efficacy, less knowledge, and low self-perceived health may represent vulnerable characteristics in patients.Practical implicationsFuture kidney transplant care should take into account patients’ access to and appraisal of health information and social support, and draw attention to potentially vulnerable groups.     

Selective Laser Melting of Al-Based Matrix Composites with Al2O3 Reinforcement: Features and Advantages

Aluminum matrix composites (AMC) are of great interest and importance as high-performance materials with enhanced mechanical properties. Al₂O₃ is a commonly used reinforcement in AMCs fabricated by means of various technological methods, including casting and sintering. Selective laser melting (SLM) is a suitable modern method of the fabrication of net-shape fully dense parts from AMC with alumina. The main results, achievements, and difficulties of SLM applied to AMCs with alumina are discussed in this review and compared with conventional methods. It was shown that the initial powder preparation, namely the particle size distribution, sphericity, and thorough mixing, affected the final microstructure and properties of SLMed materials drastically. The distribution of reinforcing particles tends to consolidate the near-melting pool-edges process because of pushing by the liquid–solid interface during the solidification process that is a common problem of various fabrication methods. The achievement of an homogeneous distribution was shown to be possible through both the thorough mixing of the initial powders and the precise optimization of SLM parameters. The strength of the AMCs fabricated by the SLM method was relatively low compared with materials produced by conventional methods, while for superior relative densities of more than 99%, hardness and tribological properties were obtained, making SLM a promising method for the Al-based matrix composites with Al₂O₃.     

Retrospective Analysis Using Pharmacokinetic/Pharmacodynamic Modeling and Simulation Offers Improvements in Efficiency of the Design of Volunteer Infection Studies for Antimalarial Drug Development

Volunteer infection studies using the induced blood stage malaria (IBSM) model have been shown to facilitate antimalarial drug development. Such studies have traditionally been undertaken in single‐dose cohorts, as many as necessary to obtain the dose‐response relationship. To enhance ethical and logistic aspects of such studies, and to reduce the number of cohorts needed to establish the dose‐response relationship, we undertook a retrospective in silico analysis of previously accrued data to improve study design. A pharmacokinetic (PK)/pharmacodynamic (PD) model was developed from initial fictive‐cohort data for OZ439 (mixing the data of the three single‐dose cohorts as: n = 2 on 100 mg, 2 on 200 mg, and 4 on 500 mg). A three‐compartment model described OZ439 PKs. Net growth of parasites was modeled using a Gompertz function and drug‐induced parasite death using a Hill function. Parameter estimates for the PK and PD models were comparable for the multidose single‐cohort vs. the pooled analysis of all cohorts. Simulations based on the multidose single‐cohort design described the complete data from the original IBSM study. The novel design allows for the ascertainment of the PK/PD relationship early in the study, providing a basis for rational dose selection for subsequent cohorts and studies.

Study Highlights

• WHAT IS THE CURRENT KNOWLEDGE ON THE TOPIC?

☑ Volunteer infection studies are routinely used in antimalarial drug development to generate early pharmacokinetic/pharmacodynamic data for compounds.

• WHAT QUESTION DID THIS STUDY ADDRESS?

☑ Can in silico analyses be used to suggest improvements to volunteer infection study designs?

• WHAT DOES THIS STUDY ADD TO OUR KNOWLEDGE?

☑ Multiple dose adaptive trial designs can potentially reduce the number of cohorts needed to establish the dose‐response relationship in volunteer infection studies.

• HOW MIGHT THIS CHANGE CLINICAL PHARMACOLOGY OR TRANSLATIONAL SCIENCE?

☑ Real time data analyses can be used to recommend doses for adaptive volunteer infection studies.

Volunteer infection studies using the induced blood stage malaria (IBSM) model have been recognized as a valuable system for defining the key pharmacokinetic (PK) and pharmacodynamic (PD) relationships for dose selection in antimalarial drug development. ¹ , ² , ³ , ⁴ , ⁵ , ⁶ , ⁷ In such studies, healthy volunteers are inoculated intravenously with a given quantity (with small variability) of Plasmodium‐infected red cells. Parasitemia is then followed by quantitative polymerase chain reaction until a prespecified treatment threshold is reached when the test drug is administered. Parasite and drug concentrations are then measured. These studies are conducted prior to phase II dose‐response (D‐R) trials and can be included in an integrated first‐in‐human study protocol, or after completion of the first‐in‐human PK and safety study. IBSM studies have been typically designed as flexible multiple cohort studies where each volunteer of one cohort receives a single dose of the same amount of drug (“single dose per cohort”). ² , ³ , ⁴ , ⁵ After each cohort, a decision is made to stop or to add a cohort to test a lower or higher dose based on the response observed in the previous cohorts.For the multiple single‐dose‐per‐cohort design, the starting dose is typically selected based on safety and PK information from a phase I single ascending dose (SAD) study and, more recently, on preclinical data from a severe combined immunodeficient mouse model, with the dose selected on the basis of being best able to inform the D‐R relationship, rather than aiming for cure. This approach, where a single dose is tested in all subjects of the initial cohort, risks missing the dose likely to be most informative for defining the PK/PD relationship.An alternative approach is to spread a range of doses across a smaller number of subjects within the initial cohort and use PK/PD models developed based on data from this cohort to support dose selections of subsequent cohorts and studies. Using data from a previous study, ² we undertook an in silico investigation of such an adaptive study design, aiming to reduce the number of subjects exposed to inefficacious doses, and to establish a D‐R relationship. This multiple‐dose‐groups‐per‐cohort design, referred to as the “2‐2‐4” design, is contrasted with the already implemented study design depicted in Figure  1 .Open in a separate windowFigure 1Comparison of standard and adaptive designs of IBSM studies. A/B/C, dose levels to be selected during the progress of the study based on pharmacokinetic/pharmacodynamic results of the initial cohort; CHMI, controlled human malaria infection; D‐R, dose‐response; IBSM, induced blood stage malaria infection; n, number of subjects at each dose.The objectives of this retrospective analysis were to: (i) compare PK/PD parameter estimates from the initial cohort of the 2‐2‐4 study design with the prior results from the data of the full study and (ii) propose a preliminary workflow to establish D‐R early in an IBSM study, and use modeling and simulation (M&S) to support dose selections for subsequent cohorts and later phase clinical trials.     

Organ-based tube current modulation in chest CT. A comparison of three vendors

IntroductionOrgan-based tube current modulation (OBTCM) is designed for anterior dose reduction in Computed Tomography (CT). The purpose was to assess dose reduction capability in chest CT using three organ dose modulation systems at different kVp settings. Furthermore, noise, diagnostic image quality and tumour detection was assessed.MethodsA Lungman phantom was scanned with and without OBTCM at 80–135/140 kVp using three CT scanners; Canon Aquillion Prime, GE Revolution CT and Siemens Somatom Flash. Thermo-luminescent dosimeters were attached to the phantom surface and all scans were repeated five times. Image noise was measured in three ROIs at the level of the carina. Three observers visually scored the images using a fivestep scale. A Wilcoxon Signed-Rank test was used for statistical analysis of differences.ResultsUsing the GE revolution CT scanner, dose reductions between 1.10 mSv (12%) and 1.56 mSv (24%) (p < 0.01) were found in the anterior segment and no differences posteriorly and laterally. Total dose reductions between 0.64 (8%) and 0.91 mSv (13%) were found across kVp levels (p < 0.00001). Maximum noise increase with OBTCM was 0.8 HU. With the Canon system, anterior dose reductions of 6–10% and total dose reduction of 0.74–0.76 mSv across kVp levels (p < 0.001) were found with a maximum noise increase of 1.1 HU. For the Siemens system, dose increased by 22–51% anteriorly; except at 100 kVp where no dose difference was found. Noise decreased by 1 to 1.5 HU.ConclusionOrgan based tube current modulation is capable of anterior and total dose reduction with minimal loss of image quality in vendors that do not increase posterior dose.Implications for practiceThis research highlights the importance of being familiar with dose reduction technologies.     

Questionnaire measures of self-directed ageing stereotype in older adults: a systematic review of measurement properties

The population is ageing, but while average life expectancy continues to increase, healthy life expectancy has not necessarily matched this and negative ageing stereotypes remain prevalent. Self-directed ageing stereotypes are hypothesised to play an important role in older adults’ health and well-being; however, a wide variety of terms and measures are used to explore this construct meaning there is a lack of clarity within the literature. A review was conducted to identify tools used to measure self-directed ageing stereotype in older adults and evaluate their quality. Searches identified 109 papers incorporating 40 different measures. Most common were the Philadelphia Geriatric Centre Morale Scale Attitude Towards Own Ageing (ATOA) subscale, Ageing Perceptions Questionnaire (APQ) and Attitudes to Ageing Questionnaire. Despite being most frequently used, the ATOA was developed to measure morale in older adults rather than self-directed ageing stereotypes. Over 25 terms were used to describe the concept, and it is suggested that for consistency the term “self-directed ageing stereotype” be adopted universally. Across measures, poor reporting of psychometric properties made it difficult to assess scale quality and more research is needed to fully assess measures before conclusions can be drawn as to the best tool; however, the Brief-APQ appears to hold most promise. Future research must address this issue before interventions to reduce negative self-directed ageing stereotypes can be developed and fully evaluated.Electronic supplementary materialThe online version of this article (10.1007/s10433-020-00574-7) contains supplementary material, which is available to authorized users.